LEATHER STRIP CUTTING TABLE UCP-1

Key features:

- A machine for cutting leather strips based on the UK-2 knife.
- Cutting unit with rotary knife and fabric clamp lifts up and down on a set of
pneumatic cylinders. When raised, the distance between tabletop and clamp is 110 mm (4.33")..
- Cutting knife cuts in both ways and can be sharpened using a built in sharpening device.
- Maximum thickness of the material: ~2mm
- Minimum strip length: 40 mm (1.57")
- Maximum cutting width: 1500 mm (59.06")
- Total table top size: W: 2235 x D: 1700 mm (88"x 67")
- Working height of the table top: 900 mm (35.43")
- Distance from the blade to the edge of the countertop: 500 mm (19.69")
- Adjustable double-sided ruler with mm tape on the countertop.
- Safety system: Two control buttons must be pressed simultaneously. Pressing any button prematurely will prevent the machine from operating.
- Safety system: The two control buttons must be released before starting the next cutting cycle.
- Safety system: Two buttons placed in such a way that operation is not possible with one hand.
- Finger sensors (OMRON F3SG light barriers).